Shop

PRODUCT DESCRIPTION: It is a 100% pure acrylic emulsion based,
semi-matt elastomeric insulation exterior paint that cures with UV
rays, hardens thanks to cross-links, has crack bridging properties.
With its special pure acrylic binder, it has a low tendency to fouling,
excellent resistance to color fading and high water vapor permeability.
It is resistant to harsh climatic conditions, has high coverage, alkali and
chemical resistance. With its elastic binder structure, it forms a film
layer on the surface, stretches perfectly. It bridges the cracks that may
occur later and prevents the formation of capillary cracks that cause
big problems. USAGE AREAS: It is use on all kinds of concrete, gas
concrete, briquette, brick, Joint Profile , cement board , plaster and
similar mineral surfaces. METHOD OF APPLICATION: The surfaces to
be applied are cleaned of all kinds of dirt, oil, loose and swollen layers
and the dusts that prevent the last coat paint and primer paint from
adhering to the surface, then saturated with PRIMER After the primer
has dried, is applied to the surfaces in two layers. It should be waited at
least for 6 hours between layers. It is thinned with max 5% -10%
volume of water and apply with brush or roller. Depending on the type
and absorbency and structure of the application surface, ~ 10-12m2
STORAGE CONDITIONS: It should be stored for 24 months in a closed
place and in its original sealed packaging at + 5 ° C to + 35 ° C.