Description Specific resin based paint which
gives the crack effect to the application surfaces.
Features Special product that gives cracking
pattern on the applied surfaces. An environmentally friendly product by means of water based.
Application Areas It can be applied to all old
painted surfaces, concrete, gypsum, black
plaster and wooden surfaces where is done
preparation of the surface.
Surface Preparation The surface to be applied
should be free from all types of dust, dirt and oil.
All of the swollen and old painted surfaces
should be removed from the surface and applied
1*7 CONCENTRATED PRIMER to obtain a
solid surface. If the surface is not smooth, it
should be surfaced by ACRYLIC PUTTY to
obtain a smooth surface.
Before applying CRACKIE, FONDO ,
UNIVERSAL PRIMER or TRANSFORMATION PRIMER should be applied to the surfaces
to be applied.
After the priming process, interior or exterior
paint is applied to the surfaces in 2 coats by
choosing the intended color which is colored in
the Tinting System.
Application
CRACKIE is applied to the surfaces minimum in
2 coats by brush or roller in where PERFETTO or
ESPERTOPLUS is applied. Minimum 6-7 hours
must be waited for drying process.
After the surface has dried, the desired color is
colored in Tinting System and applied to the
surface in a single coat with ACRYLIC PUTTY,
STUCCO, MARMORINO or any of the
INTERIOR PAINTS.
ACRYLIC PUTTY , MARMORINO and
STUCCO are applied as undiluted, INTERIOR
PAINTS is applied by thinning at maximum
5-10%
Points to Consider Before using, the paint
should be mixed in its packaging until a
homogeneous mixture is obtained
It should be applied in ambients between +5 °C
to +35 °C Celsius degree.
Application surfaces must be clean and dry.
Application should be done according to the
“Application Information” which is on the label
information card.
The applied surfaces should be protected from
physical impacts for 3 days and from effects
such as rain, snow, frost, excessive heat for 24
hours. After each application, clean brush, roller
and all equipment by water.

Solids (wt %): 79±2
Thinning: Usage ready
Consumption: 14-18 m2/lt
Shelf life: 2 years
Packaging: 1 lt
Drying Time: Touch Dry 2-3 hours, Full Dry
24 hours