Description Based on acrylic copolymer binder,
special glass beads textured , pearl pigmented, a
decorative interior top coat finishing , applied
with a brush.
Features It gives bright, pearlescent and textured
appearance on the applied surface. It is an
environmentally friendly product with high vapor
permeability and water based.
Application Areas According to all old painted
surfaces, concrete, gypsum, cement plaster,
cement board and wooden surfaces prepared for
the wall.
Surface Preparation The surface to be applied
should be free from all types of dust, dirt and oil.
All of the swollen and old painted surfaces
should be removed from the surface and applied
SATIN PLASTER PRIMER to obtain a solid
surface. If the surface is not smooth, it should be
surfaced by ACRYLIC PUTTY to obtain a
smooth surface. The surfaces to be applied
should be applied with FONDO primer before
application. Can be colored with the FONDO
primer coloring system
Application PERLA VETRO is applied directly
to the surface with a brush and the desired
pattern is given with a brush before the product
dries.
Points to Consider Before using, the paint
should be mixed in its packaging until a
homogeneous mixture is obtained
It should be applied in ambients between +5 °C
to +35 °C Celsius degree.
Application surfaces must be clean and dry.
Application should be done according to the
“Application Information” which is on the label
information card.
The applied surfaces should be protected from
physical impacts for 3 days and from effects
such as rain, snow, frost, excessive heat for 24
hours.
After each application, clean brush, roller and all
equipment by water.

Density (g/cm3): 1.10 ± 0.02
Ph: 8.5-9
Solids (wt %): 50±2
Thinning: Usage ready (can be thinned
with 5% water if necessary )
Color: Gold, Silver, Copper and Bronze
Colors can be colored with Silver color by
Tinting System.
Consumption: 7 -9 m2/lt
Shelf life: 2 years
Packaging: 1 lt-2.5 lt
Drying Time: Touch Dry 4-5 hours, Full Dry
24 hours