Description Acrylic copolymer binder-based,
interior and exterior decorative coating
containing special fillers and pigments, pasty,
given marble pattern to the surface by applying
trowel and scraper.
Features Marble effected, glossy, high hiding
power, due to its flexible structure non-cracking,
an environmentally friendly product by means of
high vapor permeability, wipeable and water
based.
Application Areas It can be applied to all old
painted surfaces, concrete, gypsum, black
plaster and wooden surfaces where is done
preparation of the surface.
Surface Preparation The application surface to
be applied should be free from all types of dust,
dirt and oil. All of the swollen and old painted
surfaces should be removed from the surface
and applied 1*7 CONCENTRATED PRIMER
to obtain a solid surface. If the surface is not
smooth, it should be surfaced by ACRYLIC
PUTTY to obtain a smooth surface.
The surfaces which will be applied should be
applied with TRANSFORMATION PRIMER or
UNIVERSAL PRIMER before application.
Application STUCCO is applied to the surfaces
where is done the surface preparation as
undiluted and mixed thoroughly and applied by
trowel or scraper for minimum in 2 coats.
Depending air temperature, should be waited
minimum 4-6 hours between the coats.
It is applied by obtaining a smooth surface by
patterning the surface with cross, horizontal-vertical spatula and trowel strokes.
By applying pressure to the trowel as final
process, the entire surface is polished a finishing
by to right-left and up-down with circular
movements. It can work superpose with different
colors.
Points to Consider Before using, the paint
should be mixed in its packaging until a
homogeneous mixture is obtained
It should be applied in ambients between +5 °C
to +35 °C Celsius degree.
Application surfaces must be clean and dry.
Application should be done according to the
“Application Information” which is on the label
information card.
The applied surfaces should be protected from
physical impacts for 3 days and from effects
such as rain, snow, frost, excessive heat for 24
hours. After each application, clean brush, roller
and all equipment by water.
Density (g/cm3): 1.60 ± 0.02
Ph: 7.5-9
Solids (wt %): 68±2
Thinning: Usage ready
Color: Tinting System.
Consumption: 7-8 m2/kg
Shelf life: 18 months
Packaging: 4 kg ve 20 kg
Drying Time: Touch Dry 3-4 hours, Full Dry
24 hours